When it comes to ceramic tiles, what everyone is most worried about is that the ceramic tiles will fall off and cause injuries, so everyone will have concerns when buying ceramic tiles. Then, when this happens, you will choose to stand by and watch. Should it go just a little bit further or should I choose another repair method? Then let’s take a look at thesolutions to tiles falling off!
First of all, we need to know what are the causes of shedding, and then let’s talk about the solutions!
1. What are the causes of ceramic tiles falling off?
1. Improper immersion of ceramic tiles
When laying ceramic tiles, if the tiles are improperly soaked in water, they will fall off. If the surface of the tiles is too dry, it will greatly affect the bonding effect between the tiles and the adhesive layer, causing them to fall off.
2. Ceramic tile quality issues
If there is a problem with the quality of the ceramic tiles, they will easily fall off. Generally, the water absorption rate of ceramic tiles exceeds 18%. If the water absorption rate of the ceramic tiles you choose exceeds this value, they will easily expand after absorbing water. In cold weather, they will peel, crack or even burst and fall off.
3. Poor handling at the grassroots level
The base layer must be treated before paving. Improper treatment will also cause the tiles to fall off.
4. Improper construction technology
If the correct paving method is not followed when paving, it will also cause problems such as the tiles falling off. For example: incorrect mortar mix ratio, uneven mixing, etc. during construction.
2. What are the repair methods for peeling ceramic tiles?
1. Only the tiles fell off
If the mortar on the bathroom tiles is not loose, but only the tiles have fallen off, you can scrape off all the mortar on the tiles, then add an appropriate amount of cement to the 107 glue and stir it into a paste. Then apply a thin layer on the back of the tiles, and then stick the tiles to the previously pasted wall. It will stick firmly after a while.
2. Tiles and mortar fall off at the same time
If the tiles are detached from the mortar, they can be placed on the ground where they were originally detached.After creating some pits, re-pare the tiles with 107 glue-added mortar. Press the tiles tightly against the wall. After a while, wait until the mortar is basically hardened, then remove your hands.
The above content is about the Solution to the peeling off of ceramic tiles. When this happens, we must first distinguish what type of peeling it is and then use this method to solve the problem. Just solve it, but don’t blindly fix it and cause unnecessary trouble. Today’s content will be shared here. Many people will go to disco today Saturday, O(∩_∩)O haha~ slip, slip, slip La!
